Rover 60 Operations Instructions download pdf (Page 37)

• Turn off the fuel pump.

• Turn off the main fuel supply valve (see figure 20) and the control

desk fuel control knob.

• Turn off the water supply to the apparatus by turning the main water

supply valve OFF.

• Before leaving the lab, ensure that there are no objects left on the

apparatus. Clean the apparatus with a piece of cloth.

4.4.3 Emergency Shutdown

Follow the following procedure in given order to shut down the gas turbine

apparatus in case of emergency:

1. Shut off the fuel burner (atomizer) by turning the fuel operating lever.

2. Move the control desk throttle lever to shut off position.

3. Turn off the fuel pump.

4. Turn off the main fuel supply valve (see figure 20) and the control

desk fuel control knob.

5. Turn off the water supply to the apparatus by turning the main water

supply valve OFF.

6. Remove the dynamometer load and ensure there is no load on the

engine.

7. Before leaving the lab, ensure that there are no objects left on the

apparatus. Clean the apparatus with a piece of cloth.

8. Notify instructor of any problems or reasons that the experiment was

terminated.

5.0 Inspection

Inspections at regular intervals shall be performed on the apparatus to ensure

that the apparatus is kept in a safe and well maintained condition. The

inspection includes the observation of any cracks in main fuel tank, control

desk fuel tank, fuel & water pipe line, leaks in combustion chamber and

engine exhaust and a routine check for bare & cut electrical wires in the

apparatus.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43 44

No comments

Rover 60 Operations Instructions Page 37